Easy To Follow Steps On How To Pack A Computer For Storage

Packing up a computer usually means getting down on your hands and knees to unplug a mess of cables and connections. A time consuming task – even for people who know what they are doing! Using these tips should make packing it up a little easier.

By far the easiest thing to do is to repack the computer into the manufacturer’s boxes. They were built for your computer and will protect it well.

Oops! Threw them out, did you? Don’t worry, follow the tips below and you’ll be able to keep your computer safe during your move and unpack it in record time.

When packing your computer, use foam pads, bubble wrap and clear plastic bags. Don’t use foam chips (often called peanuts) they produce static electricity and may damage the computer.

Back up all data before disconnecting the computer.

fido movie download

kokoda divx online derailed dvdrip download Turn your computer off and unplug it from the wall. Label the cords and cables so you know where to plug them back in later. Some people use a diagram and others take a photo.

Computer Equipment Packing 101

Cables – To avoid nasty tangles, wrap cables with twist ties, tape, or elastic bands.

download dark blue online Hard Drive – You shouldn’t need to worry about the hard drive. It stays in the computer. But if you do need to remove it, it should be placed in a static free bag and packed snugly with foam pads and styrofoam.

Monitor – Place the monitor in a plastic bag to protect the screen. Once again, a large box should be used so that there is plenty of space for padding. Bubble wrap, foam pads and styrofoam are all great at filling the air spaces and immobilizing the monitor.

Keyboard – In a separate box, wrap the keyboard twice – once in foam and then in bubble wrap.

Sound Cards and Memory Chips – Usually, you just leave these inside the computer. But if you do have to remove them, be sure they are wrapped separately in Anti-Static bags. Normal plastic and paper products may damage these components. Make sure that each piece is cushioned with bubble wrap and foam pads.

Mouse – To keep the mouse clean, put it in a little plastic bag. If you have a battery-operated wireless mouse, remove them before storing it in a plastic bag.

External CD Rom Drives and Modems – Similar to the keyboard, these items should be boxed individually and wrapped in bubble wrap and foam pads for protection.

Printer – Remove all trays, arms and paper. Each of these may then be wrapped in plastic bags. Place the printer in a plastic bag and then in the center of its own box. Surround it with foam and styrofoam to protect the fragile parts.

CDs and DVDs – These products are very tough. Using the usual jewel case is usually enough protection.

Finally, carefully box the items so they won’t bump into each other during the move. Consider adding warnings such as FRAGILE and THIS SIDE UP.

Following these suggestions will not only protect your computer but allow you to set it up quickly when you are ready to unpack as well.

About the Author:

Tags: , ,

Category: Computer Tips

Comments (1)

Trackback URL | Comments RSS Feed

  1. web proxy says:

    thanks for great tips man

Leave a Reply

WP-SpamFree by Pole Position Marketing